WELCOME TO GLOBALIA

 To get to Globalia Formación, take the Ma-19 towards Llucmajor.



The exit is number 22 towards the Son Noguera industrial estate.




As soon as you arrive at the polygon, you will quickly find Globalia, the first large building on the right.


You can park outside freely or inside as a visitor if you are not registered at the security control.

You are the red spot, 
Directions to the general building:


Directions to the training building where the students are:


When you enter the building, you must wear your mask and clean your hands with hydroalcoholic gel, there are dispensers all over the building.
You must climb the stairs and go to class number 12.

I hope that with these directions you can reach Globalia without problems, otherwise you can click on this link and the Google Maps GPS will indicate you perfectly.

Indications Google Maps






Comentarios

Publicar un comentario

Entradas populares de este blog

MY FAVORITE PLANE

Imagen
BOEING 737  My favourite aircraft has always been the Boeing 737, the quintessential Boeing model. It has beautiful aesthetics, perfect lines like an eagle. The last model B737 Max was defective and this made me very sad.  Instead of redesigning the plane, they decided to add software that would avoid the problem and because they wanted to save money, they lost innocent lives and world confidence.  Is a short to medium range, twin-engine, jet, narrow-body airliner manufactured and developed by the American company Boeing Commercial Airplanes. The Boeing 737 is the highest selling turbofan passenger aircraft in aviation history. This model has been manufactured without interruption by Boeing since 1967. It is the most widely used model on domestic flights in the United States. The Boeing 737-100 was christened on 17 January 1967 and made its first flight on 9 April of the same year.  Lufthansa inaugurated its services with this aircraft on February 10,
Leer más

D-CHECK

Imagen
Aircraft maintenance   checks are periodic inspections that have to be done on all commercial and civil aircraft after a certain amount of time or usage. Military aircraft normally follow specific maintenance programmes which may, or may not, be similar to those of commercial and civil operators The D check, sometimes known as a "heavy maintenance visit" (HMV), is by far the most comprehensive and demanding check for an airplane. This check occurs approximately every 6-10 years. It is a check that more or less takes the entire airplane apart for inspection and overhaul. Even the paint may need to be completely removed for complete inspection of the fuselage metal skin. Such a check can generally take up to 50,000 man-hours, and 2 months to complete depending on the number of technicians involved. It also requires the most space of all maintenance checks, and as such must be performed at a suitable maintenance base. The requirements and the tremendous effort involved in
Leer más

JET ENGINE

Imagen
TURBOJET The basic componets are still the compressor, combustor, and turbine. The turbojet gets its propulsive power from reaction to the flow of hot gases. Air enters the inlet and ts pressure is increased by the compressor. Fuel is added in the combustor and the expansion created by heat forces the turbine wheel to rotate. The turbine in turn drives the compressor. The energy remaining downstream of the turbine in the tailpipe accelerates into the atmosphere and creates the reaction we refer to as thrust. TURBOFAN The turbofa, in effect, is a ducted, multi-blade propeller driven by a gas turbine engine. This fan procedures a pressure ratio on the order of 2:1 or two atmospheres of compression. Generrally, turbofan contain 20 to 40 fixed pitch blades. They were developed to provide a compromise between the best features of the turbejet type cruise speed capability and yet retains some of the short field takeoff capability of the  turboprop. By compariso
Leer más