María Pérez Muñoz

Wing and Stabilizer Deicing Systems  Aircraft and turboprop commuter-type aircraft often use a pneumatic deicing system to break off ice after it has formed on the leading edge surfaces. The leading edges of the wings and stabilizers have inflatable boots attached to them. The boots expand when inflated by pneumatic pressure, which breaks away ice accumulated on the boot. Most boots are inflated for 6 to 8 seconds. They are deflated by vacuum suction. The vacuum is continuously applied to hold the boots tightly against the aircraft while not in use. We did a troubleshooting of the deicing boots. We disconnected the distribution valve pipe and introduced pressurized air with a hose connected to the workshop's pneumatic system.  The result was that the boots had huge leaks everywhere, there were many old repairs and almost all of them had jumped. In the video you can see the experiment we did to check the breakdowns.  Since I've been messing around with the latest blog posts, thi

 This week we have done the practice Wiper Electrical Motor (Turbocommder 680V)  With the Wiring Diagram (up picture), we have done a function test. The Wiper electrical motor consists of an electrical motor, a flexible drive shaft assembly, a converter assembly, and an amr and blade assembly. The system operates from 29 volt DC power throught a three position windshield wiper swith. The Wiper electrical motor has three 3-ohm resistors to protect the system, placed between two wires, one of which is the ground wire. The Wiper electrical motor installed to the right of aircraft centerline just after of the forward pressure bulkhead. My personal weekend has been full of food!! The Saturday I had a birthday, from my friend's mother, we went to a restaurant called  La Tagliatella  if you want to go, you can do click!! Very good food!!! But the desert, too small for me!!!  The Sunday, I went to an Argentinean store  Angelo Paletta  We ordered an Angelo Paletta pizza and for dessert, a m

  Assembly/dissasembly Valve Solenoid Turbocommander 680V. The work was quite simple, so we finished it in a short time. Solenoid valves are used to close, open, dose, distribute or mix the flow of gas or liquid in a pipe.  The truth is that Sergio and I form a good team, we are very fast and effective. The next task was to Assembly/dissasembly the landing gear, it was also a fairly easy and quick task.  My personal weekend was a little stressful because I have moved to Llucmajor to an old woman's house, I have to take care that she takes her medication in the morning and at night and three days a week, Monday, Wednesday and Friday, an ambulance comes for her, to take the old woman to dialysis. In exchange for looking after her, I don't have to pay rent, so until I finish studying, I will have to live with her, although I like living alone and having freedom much better.  My cat move with my of course!!! She is used to!!! with 12 years old, she has traveled all over Spain and m